NAME
cfsetispeed — set
input baud rate
SYNOPSIS
#include
<termios.h>
int cfsetispeed(struct termios *termios_p, speed_t speed);
DESCRIPTION
The cfsetispeed () function shall set the
input baud rate stored in the structure pointed to by
termios_p
to
speed.
There shall be no effect on the baud rates set in the hardware until a subsequent successful call to tcsetattr(3) with the same termios structure. Similarly, errors resulting from attempts to set baud rates not supported by the terminal device need not be detected until the tcsetattr(3) function is called.
RETURN VALUE
Upon successful completion, cfsetispeed ()
shall return 0; otherwise, -1 shall be returned, and errno
may be set to indicate the error.
ERRORS
The cfsetispeed () function may fail
if:
- [EINVAL]
- The speed value is not a valid baud rate.
- [EINVAL]
- The value of speed is outside the range of possible speed values as specified in <termios.h> .
EXAMPLES
None.
APPLICATION USAGE
None.
RATIONALE
Refer to cfgetispeed(3).
FUTURE DIRECTIONS
None.
SEE ALSO
cfgetispeed(3), cfgetospeed(3), cfsetospeed(3), tcsetattr(3), the Base Definitions volume of IEEE Std 1003.1-2001 (“POSIX.1”), xbd_chap11(7), <termios.h>
CHANGE HISTORY
First released in Issue 3. Included for alignment with the POSIX.1-1988 standard.
Issue 6
The following new requirements on POSIX implementations derive from alignment with the Single UNIX Specification:
- The optional setting of errno and the [EINVAL] error conditions are added.
End of informative text. footer end