SEM_OPEN(3) Library Functions Manual SEM_OPEN(3)

sem_open — initialize and open a named semaphore

#include <semaphore.h>

sem_t *sem_open(const char *name, int oflag, ...);

The sem_open () function shall establish a connection between a named semaphore and a process. Following a call to sem_open () with semaphore name name, the process may reference the semaphore associated with name using the address returned from the call. This semaphore may be used in subsequent calls to sem_wait(3), sem_timedwait(3), sem_trywait(3), sem_post(3), and sem_close(3). The semaphore remains usable by this process until the semaphore is closed by a successful call to sem_close(3), _exit(3), or one of the functions.

The oflag argument controls whether the semaphore is created or merely accessed by the call to sem_open (). The following flag bits may be set in oflag:

This flag is used to create a semaphore if it does not already exist. If O_CREAT is set and the semaphore already exists, then O_CREAT has no effect, except as noted under O_EXCL. Otherwise, sem_open () creates a named semaphore. The O_CREAT flag requires a third and a fourth argument: mode , which is of type mode_t , and value , which is of type unsigned . The semaphore is created with an initial value of value . Valid initial values for semaphores are less than or equal to {SEM_VALUE_MAX}.

The user ID of the semaphore shall be set to the effective user ID of the process. The group ID of the semaphore shall be set to the effective group ID of the process; however, if the name argument is visible in the file system, the group ID may be set to the group ID of the containing directory. The permission bits of the semaphore are set to the value of the mode argument except those set in the file mode creation mask of the process. When bits in mode other than the file permission bits are specified, the effect is unspecified.

After the semaphore named name has been created by sem_open () with the O_CREAT flag, other processes can connect to the semaphore by calling sem_open () with the same value of name.

If O_EXCL and O_CREAT are set, sem_open () fails if the semaphore name exists. The check for the existence of the semaphore and the creation of the semaphore if it does not exist are atomic with respect to other processes executing sem_open () with O_EXCL and O_CREAT set. If O_EXCL is set and O_CREAT is not set, the effect is undefined.

If flags other than O_CREAT and O_EXCL are specified in the oflag parameter, the effect is unspecified.

The name argument points to a string naming a semaphore object. It is unspecified whether the name appears in the file system and is visible to functions that take pathnames as arguments. The name argument conforms to the construction rules for a pathname, except that the interpretation of <slash> characters other than the leading <slash> character in name is implementation-defined, and that the length limits for the name argument are implementation-defined and need not be the same as the pathname limits {PATH_MAX} and {NAME_MAX}. If name begins with the <slash> character, then processes calling sem_open () with the same value of name shall refer to the same semaphore object, as long as that name has not been removed. If name does not begin with the <slash> character, the effect is implementation-defined.

If a process makes multiple successful calls to sem_open () with the same value for name, the same semaphore address shall be returned for each such successful call, provided that there have been no calls to sem_unlink(3) for this semaphore, and at least one previous successful sem_open () call for this semaphore has not been matched with a sem_close(3) call.

References to copies of the semaphore produce undefined results.

Upon successful completion, the sem_open () function shall return the address of the semaphore. Otherwise, it shall return a value of SEM_FAILED and set errno to indicate the error. The symbol SEM_FAILED is defined in the <semaphore.h> header. No successful return from sem_open () shall return the value SEM_FAILED.

If any of the following conditions occur, the sem_open () function shall return SEM_FAILED and set errno to the corresponding value:

The named semaphore exists and the permissions specified by oflag are denied, or the named semaphore does not exist and permission to create the named semaphore is denied.
O_CREAT and O_EXCL are set and the named semaphore already exists.
The sem_open () operation was interrupted by a signal.
The sem_open () operation is not supported for the given name, or O_CREAT was specified in oflag and value was greater than {SEM_VALUE_MAX}.
Too many semaphore descriptors or file descriptors are currently in use by this process.
Too many semaphores are currently open in the system.
O_CREAT is not set and the named semaphore does not exist.
There is insufficient memory for the creation of the new named semaphore.
There is insufficient space on a storage device for the creation of the new named semaphore.

If any of the following conditions occur, the sem_open () function may return SEM_FAILED and set errno to the corresponding value:

The length of the name argument exceeds {_POSIX_PATH_MAX} on systems that do not support the XSI option [XSI] or exceeds {_XOPEN_PATH_MAX} on XSI systems, or has a pathname component that is longer than {_POSIX_NAME_MAX} on systems that do not support the XSI option [XSI] or longer than {_XOPEN_NAME_MAX} on XSI systems.

None.

None.

Early drafts required an error return value of -1 with the type for the sem_open () function, which is not guaranteed to be portable across implementations. The revised text provides the symbolic error code SEM_FAILED to eliminate the type conflict.

A future version might require the sem_open () and sem_unlink(3) functions to have semantics similar to normal file system operations.

semctl(3), semget(3), semop(3), sem_close(3), sem_post(3), sem_timedwait(3), sem_trywait(3), sem_unlink(3)

XBD <semaphore.h>

First released in Issue 5. Included for alignment with the POSIX Realtime Extension.

The sem_open () function is marked as part of the Semaphores option.

The [ENOSYS] error condition has been removed as stubs need not be provided if an implementation does not support the Semaphores option.

The sem_timedwait(3) function is added to the SEE ALSO section for alignment with IEEE Std 1003.1d-1999.

IEEE Std 1003.1-2001 (“POSIX.1”)/Cor 2-2004, item XSH/TC2/D6/117 is applied, updating the DESCRIPTION to add the sem_timedwait(3) function for alignment with IEEE Std 1003.1d-1999.

IEEE Std 1003.1-2001 (“POSIX.1”)/Cor 2-2004, item XSH/TC2/D6/118 is applied, updating the DESCRIPTION to describe the conditions to return the same semaphore address on a call to sem_open (). The words ``and at least one previous successful sem_open () call for this semaphore has not been matched with a sem_close(3) call'' are added.

Austin Group Interpretation 1003.1-2001 #066 is applied, updating the [ENOSPC] error case and adding the [ENOMEM] error case.

Austin Group Interpretation 1003.1-2001 #077 is applied, clarifying the name argument and adding [ENAMETOOLONG] as a ``may fail'' error.

Austin Group Interpretation 1003.1-2001 #141 is applied, adding FUTURE DIRECTIONS.

SD5-XSH-ERN-170 is applied, updating the DESCRIPTION to clarify the wording for setting the user ID and group ID of the semaphore.

The sem_open () function is moved from the Semaphores option to the Base.

POSIX.1-2008, Technical Corrigendum 1, XSH/TC1-2008/0527 [37] is applied.

January 31, 2018 posix.fail