UNLINK(3) Library Functions Manual UNLINK(3)

unlink unlinkat — remove a directory entry relative to directory file descriptor

#include <unistd.h>

int unlink(const char *path);
int unlinkat(int fd, const char *path, int flag);

The unlink () function shall remove a link to a file. If path names a symbolic link, unlink () shall remove the symbolic link named by path and shall not affect any file or directory named by the contents of the symbolic link. Otherwise, unlink () shall remove the link named by the pathname pointed to by path and shall decrement the link count of the file referenced by the link.

When the file's link count becomes 0 and no process has the file open, the space occupied by the file shall be freed and the file shall no longer be accessible. If one or more processes have the file open when the last link is removed, the link shall be removed before unlink () returns, but the removal of the file contents shall be postponed until all references to the file are closed.

The path argument shall not name a directory unless the process has appropriate privileges and the implementation supports using unlink () on directories.

Upon successful completion, unlink () shall mark for update the last data modification and last file status change timestamps of the parent directory. Also, if the file's link count is not 0, the last file status change timestamp of the file shall be marked for update.

The unlinkat () function shall be equivalent to the unlink () or rmdir(3) function except in the case where path specifies a relative path. In this case the directory entry to be removed is determined relative to the directory associated with the file descriptor fd instead of the current working directory. If the file descriptor was opened without O_SEARCH, the function shall check whether directory searches are permitted using the current permissions of the directory underlying the file descriptor. If the file descriptor was opened with O_SEARCH, the function shall not perform the check.

Values for flag are constructed by a bitwise-inclusive OR of flags from the following list, defined in <fcntl.h>:

Remove the directory entry specified by fd and path as a directory, not a normal file.

If unlinkat () is passed the special value AT_FDCWD in the fd parameter, the current working directory is used and the behavior shall be identical to a call to unlink () or rmdir(3) respectively, depending on whether or not the AT_REMOVEDIR bit is set in flag.

Upon successful completion, these functions shall return 0. Otherwise, these functions shall return -1 and set to indicate the error. If -1 is returned, the named file shall not be changed.

These functions shall fail and shall not unlink the file if:

Search permission is denied for a component of the path prefix, or write permission is denied on the directory containing the directory entry to be removed.
The file named by the path argument cannot be unlinked because it is being used by the system or another process and the implementation considers this an error.
A loop exists in symbolic links encountered during resolution of the path argument.
The length of a component of a pathname is longer than {NAME_MAX}.
A component of path does not name an existing file or path is an empty string.
A component of the path prefix is not a directory, or the path argument contains at least one non- <slash> character and ends with one or more trailing <slash> characters and the last pathname component names an existing file that is neither a directory nor a symbolic link to a directory.
The file named by path is a directory, and either the calling process does not have appropriate privileges, or the implementation prohibits using unlink () on directories.
[EPERM] or [EACCES]
[XSI]
The S_ISVTX flag is set on the directory containing the file referred to by the path argument and the process does not satisfy the criteria specified in XBD .
The directory entry to be unlinked is part of a read-only file system.

The unlinkat () function shall fail if:

fd was not opened with O_SEARCH and the permissions of the directory underlying fd do not permit directory searches.
The path argument does not specify an absolute path and the fd argument is neither AT_FDCWD nor a valid file descriptor open for reading or searching.
The flag parameter has the AT_REMOVEDIR bit set and the path argument names a directory that is not an empty directory, or there are hard links to the directory other than dot or a single entry in dot-dot.
The flag parameter has the AT_REMOVEDIR bit set and path does not name a directory.

These functions may fail and not unlink the file if:

[XSI] The file named by path is a named STREAM.
More than {SYMLOOP_MAX} symbolic links were encountered during resolution of the path argument.
The length of a pathname exceeds {PATH_MAX}, or pathname resolution of a symbolic link produced an intermediate result with a length that exceeds {PATH_MAX}.
The entry to be unlinked is the last directory entry to a pure procedure (shared text) file that is being executed.

The unlinkat () function may fail if:

The value of the flag argument is not valid.
The path argument is not an absolute path and fd is neither AT_FDCWD nor a file descriptor associated with a directory.

The following example shows how to remove a link to a file named by removing the entry named .

#include <unistd.h>


char *path = "/modules/pass1";
int   status;
...
status = unlink(path);

The following example fragment creates a temporary password lock file named LOCKFILE, which is defined as , and gets a file descriptor for it. If the file cannot be opened for writing, unlink () is used to remove the link between the file descriptor and LOCKFILE.

#include <sys/types.h>
#include <stdio.h>
#include <fcntl.h>
#include <errno.h>
#include <unistd.h>
#include <sys/stat.h>


#define LOCKFILE "/etc/ptmp"


int pfd;  /* Integer for file descriptor returned by open call. */
FILE *fpfd;  /* File pointer for use in putpwent(). */
...
/* Open password Lock file. If it exists, this is an error. */
if ((pfd = open(LOCKFILE, O_WRONLY| O_CREAT | O_EXCL, S_IRUSR
    | S_IWUSR | S_IRGRP | S_IROTH)) == -1)  {
    fprintf(stderr, "Cannot open /etc/ptmp. Try again later.\n");
    exit(1);
}


/* Lock file created; proceed with fdopen of lock file so that
   putpwent() can be used.
 */
if ((fpfd = fdopen(pfd, "w")) == NULL) {
    close(pfd);
    unlink(LOCKFILE);
    exit(1);
}

The following example fragment uses unlink () to discard links to files, so that they can be replaced with new versions of the files. The first call removes the link to LOCKFILE if an error occurs. Successive calls remove the links to and so that new links can be created, then removes the link to LOCKFILE when it is no longer needed.

#include <sys/types.h>
#include <stdio.h>
#include <fcntl.h>
#include <errno.h>
#include <unistd.h>
#include <sys/stat.h>


#define LOCKFILE "/etc/ptmp"
#define PASSWDFILE "/etc/passwd"
#define SAVEFILE "/etc/opasswd"
...
/* If no change was made, assume error and leave passwd unchanged. */
if (!valid_change) {
    fprintf(stderr, "Could not change password for user %s\n", user);
    unlink(LOCKFILE);
    exit(1);
}


/* Change permissions on new password file. */
chmod(LOCKFILE, S_IRUSR | S_IRGRP | S_IROTH);


/* Remove saved password file. */
unlink(SAVEFILE);


/* Save current password file. */
link(PASSWDFILE, SAVEFILE);


/* Remove current password file. */
unlink(PASSWDFILE);


/* Save new password file as current password file. */
link(LOCKFILE,PASSWDFILE);


/* Remove lock file. */
unlink(LOCKFILE);


exit(0);

Applications should use rmdir(3) to remove a directory.

Unlinking a directory is restricted to the superuser in many historical implementations for reasons given in link(3) (see also rename(3)).

The meaning of [EBUSY] in historical implementations is "mount point busy". Since this volume of POSIX.1-2008 does not cover the system administration concepts of mounting and unmounting, the description of the error was changed to "resource busy". (This meaning is used by some device drivers when a second process tries to open an exclusive use device.) The wording is also intended to allow implementations to refuse to remove a directory if it is the root or current working directory of any process.

The standard developers reviewed TR 24715-2006 and noted that LSB-conforming implementations may return [EISDIR] instead of [EPERM] when unlinking a directory. A change to permit this behavior by changing the requirement for [EPERM] to [EPERM] or [EISDIR] was considered, but decided against since it would break existing strictly conforming and conforming applications. Applications written for portability to both POSIX.1-2008 and the LSB should be prepared to handle either error code.

The purpose of the unlinkat () function is to remove directory entries in directories other than the current working directory without exposure to race conditions. Any part of the path of a file could be changed in parallel to a call to unlink (), resulting in unspecified behavior. By opening a file descriptor for the target directory and using the unlinkat () function it can be guaranteed that the removed directory entry is located relative to the desired directory.

None.

close(3) , link(3) , remove(3) , rename(3) , rmdir(3) , symlink(3)

XBD V1_chap04(7) , <fcntl.h> , <unistd.h>

First released in Issue 1. Derived from Issue 1 of the SVID.

The [EBUSY] error is added to the optional part of the ERRORS section.

The following new requirements on POSIX implementations derive from alignment with the Single UNIX Specification:

  • In the DESCRIPTION, the effect is specified if path specifies a symbolic link.
  • The [ELOOP] mandatory error condition is added.
  • A second [ENAMETOOLONG] is added as an optional error condition.
  • The [ETXTBSY] optional error condition is added.

The following changes were made to align with the IEEE P1003.1a draft standard:

  • The [ELOOP] optional error condition is added.

The normative text is updated to avoid use of the term "must" for application requirements.

Austin Group Interpretation 1003.1-2001 #143 is applied.

Austin Group Interpretation 1003.1-2001 #181 is applied, updating the requirements for operations when the S_ISVTX bit is set.

Text arising from the LSB Conflicts TR is added to the RATIONALE about the use of [EPERM] and [EISDIR].

The unlinkat () function is added from The Open Group Technical Standard, 2006, Extended API Set Part 2.

Changes are made related to support for finegrained timestamps.

Changes are made to allow a directory to be opened for searching.

The [ENOTDIR] error condition is clarified to cover the condition where the last component of a pathname exists but is not a directory or a symbolic link to a directory.

January 1, 2008 posix.fail