PRINTF(1) General Commands Manual PRINTF(1)

printf — write formatted output

printf format [argument ...]

The printf utility shall write formatted operands to the standard output. The argument operands shall be formatted under control of the format operand.

None.

The following operands shall be supported:

format
A string describing the format to use to write the remaining operands. See the EXTENDED DESCRIPTION section.
argument
The strings to be written to standard output, under the control of format . See the EXTENDED DESCRIPTION section.

Not used.

None.

The following environment variables shall affect the execution of printf:

Provide a default value for the internationalization variables that are unset or null. (See XBD the precedence of internationalization variables used to determine the values of locale categories.)
If set to a non-empty string value, override the values of all the other internationalization variables.
Determine the locale for the interpretation of sequences of bytes of text data as characters (for example, single-byte as opposed to multi-byte characters in arguments).
Determine the locale that should be used to affect the format and contents of diagnostic messages written to standard error.
Determine the locale for numeric formatting. It shall affect the format of numbers written using the e , E , f , g , and G conversion specifier characters (if supported).
[ XSI] Determine the location of message catalogs for the processing of LC_MESSAGES.

Default.

See the EXTENDED DESCRIPTION section.

The standard error shall be used only for diagnostic messages.

None.

The format operand shall be used as the format string described in XBD V1_chap05(7) with the following exceptions:

  1. A <space> in the format string, in any context other than a flag of a conversion specification, shall be treated as an ordinary character that is copied to the output.
  2. A ‘’ character in the format string shall be treated as a ‘’ character, not as a <space>.
  3. In addition to the escape sequences shown in XBD V1_chap05(7) ( ‘\\’, ‘\a’, ‘\b’, ‘\f’, ‘\n’, ‘\r’, ‘\t’, ‘\v’ ), "\ddd", where ddd is a one, two, or three-digit octal number, shall be written as a byte with the numeric value specified by the octal number.
  4. The implementation shall not precede or follow output from the d or u conversion specifiers with <blank> characters not specified by the format operand.
  5. The implementation shall not precede output from the o conversion specifier with zeros not specified by the format operand.
  6. The a, A, e, E, f, F, g, and G conversion specifiers need not be supported.
  7. An additional conversion specifier character, b, shall be supported as follows. The argument shall be taken to be a string that can contain <backslash>-escape sequences. The following <backslash>-escape sequences shall be supported:
    • The escape sequences listed in XBD V1_chap05(7) ( ‘\\’, ‘\a’, ‘\b’, ‘\f’, ‘\n’, ‘\r’, ‘\t’, ‘\v’ ), which shall be converted to the characters they represent
    • "\0ddd", where ddd is a zero, one, two, or three-digit octal number that shall be converted to a byte with the numeric value specified by the octal number
    • ‘\c’, which shall not be written and shall cause printf to ignore any remaining characters in the string operand containing it, any remaining string operands, and any additional characters in the format operand

    The interpretation of a <backslash> followed by any other sequence of characters is unspecified.

    Bytes from the converted string shall be written until the end of the string or the number of bytes indicated by the precision specification is reached. If the precision is omitted, it shall be taken to be infinite, so all bytes up to the end of the converted string shall be written.

  8. For each conversion specification that consumes an argument, the next argument operand shall be evaluated and converted to the appropriate type for the conversion as specified below.
  9. The format operand shall be reused as often as necessary to satisfy the argument operands. Any extra b, c, or s conversion specifiers shall be evaluated as if a null string argument were supplied; other extra conversion specifications shall be evaluated as if a zero argument were supplied. If the format operand contains no conversion specifications and argument operands are present, the results are unspecified.
  10. If a character sequence in the format operand begins with a ‘%’ character, but does not form a valid conversion specification, the behavior is unspecified.
  11. The argument to the c conversion specifier can be a string containing zero or more bytes. If it contains one or more bytes, the first byte shall be written and any additional bytes shall be ignored. If the argument is an empty string, it is unspecified whether nothing is written or a null byte is written.

The argument operands shall be treated as strings if the corresponding conversion specifier is b, c, or s, and shall be evaluated as if by the strtod(3) function if the corresponding conversion specifier is a, A, e, E, f, F, g, or G. Otherwise, they shall be evaluated as unsuffixed C integer constants, as described by the ISO C standard, with the following extensions:

  • A leading <plus-sign> or <hyphen-minus> shall be allowed.
  • If the leading character is a single-quote or double-quote, the value shall be the numeric value in the underlying codeset of the character following the single-quote or double-quote.
  • Suffixed integer constants may be allowed.

If an argument operand cannot be completely converted into an internal value appropriate to the corresponding conversion specification, a diagnostic message shall be written to standard error and the utility shall not exit with a zero exit status, but shall continue processing any remaining operands and shall write the value accumulated at the time the error was detected to standard output.

It shall not be considered an error if an argument operand is not completely used for a b, c, or s conversion.

The following exit values shall be returned:

Successful completion.
An error occurred.

Default.

The floating-point formatting conversion specifications of printf(3) are not required because all arithmetic in the shell is integer arithmetic. The awk(1) utility performs floating-point calculations and provides its own function. The bc(1) utility can perform arbitrary-precision floating-point arithmetic, but does not provide extensive formatting capabilities. (This printf utility cannot really be used to format bc(1) output; it does not support arbitrary precision.) Implementations are encouraged to support the floating-point conversions as an extension.

Note that this printf utility, like the printf(3) function defined in the System Interfaces volume of POSIX.1-2008 on which it is based, makes no special provision for dealing with multi-byte characters when using the %c conversion specification or when a precision is specified in a %b or %s conversion specification. Applications should be extremely cautious using either of these features when there are multi-byte characters in the character set.

No provision is made in this volume of POSIX.1-2008 which allows field widths and precisions to be specified as ‘*’ since the ‘*’ can be replaced directly in the format operand using shell variable substitution. Implementations can also provide this feature as an extension if they so choose.

Hexadecimal character constants as defined in the ISO C standard are not recognized in the format operand because there is no consistent way to detect the end of the constant. Octal character constants are limited to, at most, three octal digits, but hexadecimal character constants are only terminated by a non-hex-digit character. In the ISO C standard, the "##" concatenation operator can be used to terminate a constant and follow it with a hexadecimal character to be written. In the shell, concatenation occurs before the printf utility has a chance to parse the end of the hexadecimal constant.

The %b conversion specification is not part of the ISO C standard; it has been added here as a portable way to process <backslash>-escapes expanded in string operands as provided by the echo(1) utility. See also the APPLICATION USAGE section of echo(1) for ways to use printf as a replacement for all of the traditional versions of the echo(1) utility.

If an argument cannot be parsed correctly for the corresponding conversion specification, the printf utility is required to report an error. Thus, overflow and extraneous characters at the end of an argument being used for a numeric conversion shall be reported as errors.

To alert the user and then print and read a series of prompts:

printf "\aPlease fill in the following: \nName: "
read name
printf "Phone number: "
read phone

To read out a list of right and wrong answers from a file, calculate the percentage correctly, and print them out. The numbers are right-justified and separated by a single <tab>. The percentage is written to one decimal place of accuracy:

while read right wrong ; do
    percent=$(echo "scale=1;($right*100)/($right+$wrong)" | bc)
    printf "%2d right\t%2d wrong\t(%s%%)\n" \
        $right $wrong $percent
done < database_file
The command: 
printf "%5d%4d\n" 1 21 321 4321 54321

produces:

   1  21
  3214321
54321   0

Note that the format operand is used three times to print all of the given strings and that a ‘0’ was supplied by printf to satisfy the last %4d conversion specification.

The printf utility is required to notify the user when conversion errors are detected while producing numeric output; thus, the following results would be expected on an implementation with 32-bit twos-complement integers when %d is specified as the format operand:

Standard
Argument Output Diagnostic Output
5a 5 printf: 5a not completely converted
9999999999 2147483647 printf: 9999999999 arithmetic overflow
-9999999999 -2147483648 printf: -9999999999 arithmetic overflow
ABC 0 printf: ABC expected numeric value

The diagnostic message format is not specified, but these examples convey the type of information that should be reported. Note that the value shown on standard output is what would be expected as the return value from the strtol(3) function as defined in the System Interfaces volume of POSIX.1-2008. A similar correspondence exists between %u and strtoul(3) and %e, %f, and %g (if the implementation supports floating-point conversions) and strtod(3).

In a locale using the ISO/IEC 646:1991 standard as the underlying codeset, the command:

printf "%d\n" 3 +3 -3 \'3 \"+3 "'-3"

produces:

Numeric value of constant 3
Numeric value of constant 3
Numeric value of constant -3
Numeric value of the character '3' in the ISO/IEC 646:1991 standard codeset
Numeric value of the character '+' in the ISO/IEC 646:1991 standard codeset
Numeric value of the character '-' in the ISO/IEC 646:1991 standard codeset

Note that in a locale with multi-byte characters, the value of a character is intended to be the value of the equivalent of the representation of the character as described in the System Interfaces volume of POSIX.1-2008.

The printf utility was added to provide functionality that has historically been provided by echo(1). However, due to irreconcilable differences in the various versions of echo(1) extant, the version has few special features, leaving those to this new printf utility, which is based on one in the Ninth Edition system.

The EXTENDED DESCRIPTION section almost exactly matches the printf(3) function in the ISO C standard, although it is described in terms of the file format notation in XBD V1_chap05(7).

Earlier versions of this standard specified that arguments for all conversions other than b, c, and s were evaluated in the same way (as C constants, but with stated exceptions). For implementations supporting the floating-point conversions it was not clear whether integer conversions need only accept integer constants and floating-point conversions need only accept floating-point constants, or whether both types of conversions should accept both types of constants. Also by not distinguishing between them, the requirement relating to a leading single-quote or double-quote applied to floating-point conversions even though this provided no useful functionality to applications that was not already available through the integer conversions. The current standard clarifies the situation by specifying that the arguments for floating-point conversions are evaluated as if by strtod(3), and the arguments for integer conversions are evaluated as C integer constants, with the special treatment of leading single-quote and double-quote applying only to integer conversions.

None.

awk(1), bc(1), echo(1)

XBD V1_chap05(7), V1_chap08(7)

XSH fprintf(3), strtod(3)

First released in Issue 4.

Austin Group Interpretations 1003.1-2001 #175 and #177 are applied.

SD5-XCU-ERN-97 is applied, updating the SYNOPSIS.

POSIX.1-2008, Technical Corrigendum 2, XCU/TC2-2008/0156 [727], XCU/TC2-2008/0157 [727,932], XCU/TC2-2008/0158 [584], and XCU/TC2-2008/0159 [727] are applied.

January 1, 2016 posix.fail